ELECTRONIC GEAR SELECT KIT
Electronic gear select made possible by using a Linear Actuator to move the gear change on an automatic vehicle, therefore giving simple remote switching for the drivers, a perfect modification for drivers with disabilities..
​
Comes with a 100mm stroke, 12 volt high quality Thomson Linear feedback Actuator. Operating a lever at 340N push/pull at 25mm/second. 6.35mm mount holes at each end allow for a range of mounting options. This will work on the gear lever, on the cable or moving the gearbox arm direct.
New style stainless button and LED panel. The lights next to the buttons will illuminate to show when the correct gear is selected and ready. Easy to fit, use and looks stylish.
​
Simple two plug 2m cable to connect the switch panel to the electronic control module. ECM is resin filled and comes with simple on board potentiometers to adjust the position for each stop. A relay will switch the postioning of the Actuator and a transistor will switch the power ensure long life and smooth operation. The actuator is connected via two plugs in simple screw terminal connectors
. Safety inputs to circuit are built in to stop unwanted changes of the gear. Can be connected to the foot or hand brake switch to disable gear select unless brake is on. Power interruption or unwanted reset condition are catered for in a safe manner, with no gear change unless a button is pressed. Easy set-up procedure to set each stop point.